Pour point depressants are used to allow the use of petroleum based mineral oils at lower temperatures. The lowest temperature at which a fuel or oil will pour is called a pour point. Wax crystals, which form at lower temperatures, may interfere with lubrication of mechanical equipment. High-quality pour point depressants can lower a pour point of an oil additive by as much as 40°C. Co-polymer and diester base product in Hydrocarbon solvent. It modifies the wax crystallization of crude oils and prevents & retards growth of interlinking crystals.

• Should be applied to oil above its cloud point continuously into the crude at a rate of 100 – 1000 ppm to achieve the required pour point specifications.
• Dosage up to 2000 ppm or more may be required to lower the pour point of the crude to the desirable level.
• The recommended treat rate should be determined by pour point testing on
• fresh crude oil. The dosages are very much dependent on the characteristics of the oil and of the production system.
• It is advisable to contact our Technical Representative for evaluation of the system prior to application of the PPD.

• Appearance: Pale Yellow Liquid
• Specific Gravity @ 20°C: 0.84 – 0.89 g/cc
• Solubility: Soluble in Oil & Insoluble in Water