UNITOP-FI-4104
UNITOP-FI-4104
Description
A combination of Pour Point Depressant & paraffin dispersant for Crude Oil & residues.
Packaging
Material is packed in 5 gal per can with proper hazard identification details labelled.
Safety and Handling
Material must be handled as an Industrial chemical, wearing protective equipment and following the precautions as mentioned in the MSDS
Pour point depressants are used to allow the use of petroleum based mineral oils at lower temperatures. The lowest temperature at which a fuel or oil will pour is called a pour point. Wax crystals, which form at lower temperatures, may interfere with lubrication of mechanical equipment. High-quality pour point depressants can lower a pour point of an oil additive by as much as 40°C. Co-polymer and diester base product in Hydrocarbon solvent. It modifies the wax crystallization of crude oils and prevents & retards growth of interlinking crystals.
• Should be applied to oil above its cloud point continuously into the crude at a rate of 100 – 1000 ppm to achieve the required pour point specifications.
• Dosage up to 2000 ppm or more may be required to lower the pour point of the crude to the desirable level.
• The recommended treat rate should be determined by pour point testing on
• fresh crude oil. The dosages are very much dependent on the characteristics of the oil and of the production system.
• It is advisable to contact our Technical Representative for evaluation of the system prior to application of the PPD.
• Appearance: Pale Yellow Liquid
• Specific Gravity @ 20°C: 0.84 – 0.89 g/cc
• Solubility: Soluble in Oil & Insoluble in Water